About ITL
National Quality Supervision and InspectionCenter of InformationTransmission Lines ...  More
  Training
According to letter from the ministry of Labor and Social Security, the twenty-third Research...    More
  306 Metrology Station
The 306 Military electronic metrology station also know as the 306 electronic metrology station... More
  Standardization Committee
  SAC/TC190 "National Standardization Technical Committees of High ...    More
 
Operation Ranges
Electrical performance parameters(Measurement Capability)

No.

Item

Standard

1

Conductor Continuity

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 
IEC 61196-1-1 Coaxial communication cables-Part 1-1Capability approval for coaxial cables

2

D.C. resistance

GB/T 3048-2007 Test methods for properties of electric cables and wires
ASTM 4566D Standard Test methods for Electrical Performance properties of Insulations and jackets for telecommunications wire and cable

3

Insulation resistance

GB/T 3048-2007 Test methods for properties of electric cables and wires
ASTM 4566D Standard Test methods for Electrical Performance properties of Insulations and jackets for telecommunications wire and cable

4

Contact Resistance

GB/T11313-1996 Radio-frequency connector Part1: Generic specification General requirements and measuring methods

5

Withstand voltage

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 

IEC 61196-1 2005 Coaxial communication cables-Part 1:Generic specification-General, definitions and requirements

6

High Voltage Cut-Through

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 

7

Ampacity

ANSI/SCTE 32 2002(R2007) Ampacity of Coaxial Telecommunications Cables

8

Capacitance

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 
61196-1-103 2004 Electrical test methods Test for capacitcance of cable
ASTM 4566 D Standard Test methods for Electrical Performance properties of Insulations and jackets for telecommunications wire and cable

9

Characteristic Impedance

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 
61196-1-108 Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

10

Attenuation

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods
IEC 61196-1-1 :2004Coaxial communication cables-Part 1-1Capability approval for coaxial cables

11

Phase

IEC 61196-1 2005 Coaxial communication cables-Part 1:Generic specification-General, definitions and requirements
61196-1-108 Electrical test methods Test for characteristic impedanc, phase and group delay, electrical length and propagation velocity

12

Structrual Return Loss

ANSI/SCTE 03-1997 Test Method for Coaxial Cable Structural Return Loss
ASTM D 4566 1999 Standard Test methods for Electrical Performance properties of Insulations and jackets for telecommunications wire and cable

13

Return Loss

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods 
IEC 61196-1 2005 Coaxial communication cables-Part 1:Generic specification-General, definitions and requirements
61196-1-108 Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

14

Characteristic Impedance

YD/T 838.1-2003 Digit telecommunication opposite wind/star wind cables Part 1: Generic specification
ANSI/SCTE 66 2003 (Formerly IPS TP 006) Test Method For Coaxial Cable Impedance

15

Delay

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods.
IEC 61196-1 2005 Coaxial communication cables-Part 1:Generic specification-General, definitions and requirements
61196-1-108 Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

16

Relative Propagation Velocity

IEC 61196-1 2005 Coaxial communication cables-Part 108:Electrical test methods-Test for characteristic impedance. phase and group delay. electrical length and propagation velocity
61196-1-108 Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

17

Dielectric Strength Withstand

IEC 61196-1 2005 Coaxial communication cables-Part 1:Generic specification-General, definitions and requirements

18

screening attenuation

Absorbing clamp method

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods.
IEC 62153-4-5:2006 Metallic communication cables test methods –Part 4-5:Electromagnetic compatibility (EMC) –Coupling or screening attenuation –Absorbing clamp method
BS EN 50289-1-6:2002 Communication cables — Specifications for test methods —Part 1-6: Electrical test methods —Electromagnetic performance

Triaxial method

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods
IEC 62153-4-4:2004 Electromagnetic compatibility (EMC) –Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz
BS EN 50289-1-6:2002 Communication cables — Specifications for test methods —Part 1-6: Electrical test methods —Electromagnetic performance

Magnetic Close Field Probe

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods

19

Surface transfer impedance

GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods
IEC 62153-4-3 Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
BS EN 50289-1-6:2002 Communication cables — Specifications for test methods —Part 1-6: Electrical test methods —Electromagnetic performance

20

Intermodulation level measurement

GB/T 21021-2007/IEC 62037:1999 RF connector,connector cable assemblies and cable- Intermodulation level measurement

21

Coupling Loss

GB/T 15285-1994 Sectional specification for leaky coaxial cables
IEC 61196-4:2004 Part 4: Sectional specification for radiating cables

22

RF high Voltage resistance  

GJB 681A-2002 Connertors,coaxial,radio frequency general specification for

23

Cross-talk between coaxial cables

IEC 61196-1-122 Coaxial communication cables-Part 1-122:Electrical test methods-Test for cross-talk between coaxial cables

24

Volume Resistance  

IEC 61196-1 2005 Coaxial communication cables

25

CAT 5
&CAT 6 Cables

Attenuation

IEC 61156-2006 MULTICORE AND SYMMETRICAL PAIR QUAD CABLES FOR DIGITAL COMMUNICATIONS

TIA-EIA-568-B.2-1-2002 Addendem 1 Transmission Performance Specifications for 4-Pair 100 ohm Cate

YD/T 1019 Multicore and Symmetrical Pair/Quad Cables for Digital Communications Horizontal Floor Wiring-Solid Polyolefin Insulate

ASTM 4566D Standard Test methods for Electrical Performance properties of Insulations and jackets for telecommunications wire and cable

IEC 61156-2006 Multicore and symmetrical pair quad cables for digital communications

IEC 61156-12002 Multicore and symmetrical pair cables for digital communications -  Part 1:Generic specification

IEC 61156-1-1:2001 Multicore and symmetrical pair cables for digital communications - Part 1-1: Capability Approval- Generic specification

ANSI/TIA-568-C.0-2009 Generic Telecommunications Cabling for Customer Premises

ANSI/TIA-568-C.1-2009 Commercial Building Telecommunications Cabling Standard

ANSI/TIA-568-C.2-2009 Blanced Twisted-Pair Telecommunications Cabling and Components Standard

NEXT

ELNEXT

input impedance  

Characteristic Impedance

Fitted  impedance

Phase Delay

Propagation delay skew

Return Loss

Structrual Return Loss

screening attenuation

FEXT

26

Channel&Link

Attenuation

YD/T 1013 Cabling system for building general electronic performance technical specifications and testing method

IEC 11801 Information technology-Generic cabling for customer premises

TIA-EIA-568-B.2-1-2002 Addendum 1 Transmission Performance Specifications for 4-Pair 100 ohm Cate

NEXT

ELFEXT

Characteristic Impedance

Phase Delay

Propagation delay skew

Return Loss

Structrual Return Loss

Copyright © 2010 ITL. All Rights Reserved
Address: No. 230 TieShan Road,Shanghai Zip: 201900 021-33792735(Business)  021-33792750(Technology)  Fax: 021-33792736  Telephone complaints:021-33792730 13801950912
沪ICP备06005663号  Design By:erp110