Physical & Chemical test capability
   
  About ITL
National Quality Supervision and InspectionCenter of InformationTransmission Lines ...  More
  Training
According to letter from the ministry of Labor and Social Security, the twenty-third Research...    More
  306 Metrology Station
The 306 Military electronic metrology station also know as the 306 electronic metrology station... More
  Standardization Committee
  SAC/TC190 "National Standardization Technical Committees of High ...    More
 
Operation Ranges
Physical & Chemical test capability
No. Item Standard

1

RoHS 

IEC 62321-2008 Procedures for the Determination of Levels of Six Regulated Substances(Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers) in Electrotechnical Products
SJ/T 11365-2006Testing methods for hazardous substances in electronic information products

2

smoke
density

IEC 61034: 2005 Measurement of smoke density of cables burning under defined conditions
GB/T 17651.117651.2-1998 Measurement of smoke density of cables burning under defined conditions
ASTM E 662-2009 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

3

Toxicity Index

NES 713:2000 Determination Of The Toxicity Index Of The Products of combustion From Small Specimens Of Materials
JB/T 10707-2007 Low-smoke halogen-free thermoplastic compounds for flame retardant cables

4

Halogen acid gas

GB/T 17650.1-1998 Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid gas
GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables Part 2: Determination of degree of acidity of gases by measuring pH and conductivity

IEC 60754-1:1994 Test on gases evolved during combustion of materials from cables – Part 1: Determination of the amount of halogen acid gas 
IEC 60754-2:1994 Test on gases evolved during combustion of electric cables – Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity

5

Carbon black content

GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41: Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis (TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope

6

Oxygen index

GB/T 2406.1-2008 Plastics-Determination of burning behavior by oxygen index-Part 1:Guidance  
ISO 4589-1:1996 Plastics-Determination of burning behavior by oxygen index-Part 1:Guidance
GB/T 2406.2-2009 Plastics-Determination of burning behavior by oxygen index-Part 2:Ambient-temperature test
ISO 4589-2:1996 Plastics-Determination of burning behavior by oxygen index-Part 2:Ambient-temperature test

7

Oxidative inductive time

ASTM D 4565-99 Standard Test Methods for Physical and Environmental Performance Properties for Insulation and jackets for telecommunication wire and cable
GB/T 2951.37-94 Test method for determining mechanical and physical properties of electric cables and wire Test for oxidative inductive time
JB/T 10696.8-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires – Part 8: Test for oxidative inductive time

8

Circuit integrity

IEC 60331-11: 2009 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus – Fire alone at a flame temperature of at least 750 
IEC 60331-21: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 21:  Procedures and requirements – Cable of rated voltage up to and including 0.6/1.0kV 
IEC 60331-23: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 23:  Procedures and requirements – Electric data cables
IEC 60331-25: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 25:  Procedures and requirements – Optical fibre cables 
GB/T 19216.11-2003
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus – Fire alone at a flame temperature of at least 750 

GB/T 19216.21-2003 Tests for electric cables under fire conditions – Circuit integrity – Part 21: Procedures and requirements – Cable of rated voltage up to and including 0.6/1.0kV
GB/T 19216.23-2003 Tests for electric cables under fire conditions – Circuit integrity - Part 23: Procedures and requirements – Electric data cables
GB/T 19216.25-2003 Tests for electric cables under fire conditions – Circuit integrity - Part 25: Procedures and requirements – Optical fibre cables

9

Carbon black dispersion

GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41: Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis (TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

10

Density

GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13: Method for general application – measurement for determining the density – water absorption tests –shrinkage test
IEC 60811-1-3: 2001 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13:Methods of general application- Measurement for determining the density-water absorption tests- Shrinkage test

11 Pressure test at high temperature GB/T 2951.31-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 31: Methods specific to PVC compounds-Pressure test at high temperature-Test for resistance to cracking 
IEC 60811-3-1-am2 ed1.0(2001-05) Amendment 2 - Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking compounds-Pressure test at high temperature-Test for resistance to cracking     
IEC 60189-1:2007 Low- frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods
ASTM D 4565-99(2004) Standard Test Methods for Physical and Environmental Performance Properties for Insulations and Jackets for Telecommunications Wire and Cable
 12  Loss of mass test  GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test 
IEC 60811-3-2-am2 ed1.0(2003-12) Amendment 2 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test
13 Shrinkage test GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13: Methods of general application- Measurement for determining the density-water absorption tests- Shrinkage test          
IEC 60811-1-3 ed2.1 Consol. with am1(2001-07) Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test
14 Liquidity test GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods   
IEC 61196-1:2005 Coaxial communication cables – Part 1: Generic specification – General, definitions, requirements
15 Dimension stability GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods      
IEC 61196-1:2005 Coaxial communication cables – Part 1: Generic specification – General, definitions, requirements
16 Flame test GB/T 18380.11-2008 Tests on Electric and optical fibre cables under fire conditions – Part 11: Test for vertical flame propagation for a single insulated wire or cable – Apparatus
GB/T 18380.12-2008  Tests on Electric and optical fibre cables under fire conditions – Part 12: Test for vertical flame propagation for a single insulated wire or cable –Procedure for 1kW pre-mixed flame 
GB/T 18380.21-2008 Tests on Electric and optical fibre cables under fire conditions – Part 21: Test for vertical flame propagation for a single insulated wire or cable –Apparatus 
GB/T 18380.22-2008 Tests on Electric and optical fibre cables under fire
conditions – Part 11: Test for vertical flame propagation for a single insulated wire or cable –Procedure for diffusion flame 
GB/T 18380.13-2008 Tests on Electric and optical fibre cables under fire conditions – Part 13: Test for vertical flame propagation for a single small insulated wire or cable –Procedures for determination of flame droplets/particles 
UL 1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords(Vertical-Tray Fire-Propagation except Smoke-Release Test)
UL 1685-2007 UL Standard for Safety Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables Third Edition; Reprint with revisions through and including December 5, 2007
IEC 60332-1-1: 2004 Tests on electric and optical fibre cables under fire conditions-part 1-1: Test for vertical flame propagation for a single insulated wire or cable- Apparatus
IEC 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions-part 1-2: Test for vertical flame propagation for a single insulated wire or cable-Procedure for 1kW Pre-mixed flame
IEC 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions- part 1-3:Test for vertical flame propagation for a single insulated wire or cable- procedure for determination of flaming droplets /particles 
IEC 60189-1:2007 Low- frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods 
IEC 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions- part 2-1:test for vertical flame propagation for a single small insulated wire or cable- Apparatus
IEC 60332-2-2:2004- Tests on electric and optical fibre cables under fire conditions- part 2-2:test for vertical flame propagation for a single small insulated wire or cable- procedure for diffusion flame
UL 1581-2008 Reference Standard for Electrical Wires Cables and Flexible Cords(VW-1, FT1, FT2)
17 Flame spread of bunched GB/T 18380.33-2008 Tests on electric and optical fibre cables under fire conditions- part 33:Test for vertical flame spread of vertically-mounted bunched wires or cablesCategory A
GB/T 18380.34-2008 Tests on electric and optical fibre cables under fire conditions- part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables
Category B
GB/T 18380.35-2008 Tests on electric and optical fibre cables under fire conditions- part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables
Category C
GB/T 18380.36-2008 Tests on electric and optical fibre cables under fire conditions- part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables
Category D
IEC 60332-3-22: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A 
IEC 60332-3-23: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC 60332-3-24: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 
IEC 60332-3-25
: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
18 Melt flow index GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
ASTM D 4565-992004Standard Test Methods for Physical and Environmental Performance Properties for Insulations and Jackets for Telecommunications Wire and Cable
19 Thickness of metallic coatings JB/T 3135-1999 Silver coated annealed copper round wires
20 Continuity of coating GB/T 4909.9-2009 Test method for bare wires-Part 9 : Test for continuity of coating- Sodium polysulfide solution method
21 Adherence of coating GB/T 4909.11-2009 Test method for bare wires -Part 11: Test for adherence of coating
22 Solderability test of coating GB/T 2423.28-2005 Environmental testing for electric and electronic products- Part2:Test methods- Test T:Soldering
IEC 60068-2-20 ed5.0(2008-07)Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
23 Lower temperature brittleness GB/T 5470-2008 PlasticsDetermination of the brittleness temperature by impact  
ISO 974: 2000 Plastics
Determination of the brittleness temperature by impact
ASTM D 746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
24 vibrationshock GB/T 2423.43-2008 Environmental testing for electric and electronic products-Part 2: Test methods - Mounting of specimens for vibrationimpact and similar dynamic tests
IEC 60966-1-1999Radio frequency and coaxial cable assemblies - Part 1:Generic specification - General requirements and test methods
IEC 60068-2-47: 2005 Environmental testing -  Part 2-47: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests
25 Bump GB/T 2423.6-1995 Environment testing for electric and electronic products Part 2:Test methods Test Eb and guidance: Bump  
IEC 68-2-29: 1987 Basic Environmental testing procedures Part 2: Tests-Test Eb and guidance: Bump
IEC 60966-1-1999Radio frequency and coaxial cable assemblies - Part 1:Generic specification - General requirements and test methods
26 Thermal stability test GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test                                                      IEC 60811-3-2: 1985 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test
27 Environmental stress cracking GB/T 2951.41-2008  Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
Copyright © 2010 ITL. All Rights Reserved
Address: No. 230 TieShan Road,Shanghai Zip: 201900 021-33792735(Business)  021-33792750(Technology)  Fax: 021-33792736  Telephone complaints:021-33792730 13801950912
沪ICP备06005663号  Design By:erp110